SMC material is made of SMC chopped strands in length of 2.5mm with content of 15%, 20%, 25% or 30%, mixed polyester resin and flame retardant, and then pressed into material in 1m width and sealed in PVC film bag.
It is the basic material for the production of electrical insulation equipment and sport equipment. The finished product is 50kg/carton or 1ton/pallet, one 20’GP can load 20 tons. Normally we can choose different containers to deliver our products. When the temperature is below 22℃, we can use general container. And in other conditions, we can use frozen container.
Related Industry Knowledge
- Plastic Mould
- Introduction to Plastic Mould
- Main classification of plastic moulds
- Structural elements of plastic moulds
- Material requirements for plastic m...
- Material selection of plastic mould
- Technical application of plastic mould
- Mold Development
- Injection mould
- The composition of the mould
- Mold flow analysis
- How to Select a Good Mold Manufactu...
- Hot runner types and their applicat...
- The Hot Runner types
- Why the venting is so important for...
- The texture for plastic injection mold
- Mold Trial Instruction
- More Plating Tips for Plastic Injec...
- Important Considerations for the Ej...
- Mold Trial Steps